Should You Use Angled Vs Straight Finish Nailer for Your Project?

Nail Guns are popular construction tools thanks to their convenience and accuracy. They gain popularity because they serve as a great alternative to heavy equipment such as hand tools, dynamite, and other specialized tools. 

Nailers are also ideal DIY implements to have because of how safer they seem to be in comparison to hammers. But not all nail guns work the same as others. There is always a need to distinguish from the other.

We will differentiate in this article between Angled Vs Straight Finish Nailers. By the end, we will determine how one performs better than the other.

What is a Straight Finish Nailer?

Straight-Finish-Nailer
Image: YouTube.com

A Straight Nailer is a nail gun with no curve or angle head designs. This nail gun’s magazine runs along its handle at a right angle, creating the Straight Nailer’s standard boxy shape.

Straight Nail Guns come in different sizes, perfect for trimming, decking, and framing. The right Straight Nailer for you boils down to what kind of construction task you have.

What is an Angled Finish Nailer?

Angled-Finish-Nailer
Image: YouTube.com

Unlike the Straight Nailer, an Angled Nail Gun’s magazine runs at a slight angle. The design makes the magazine goes toward the user’s arm, making it more comfortable to drive nails in corners and edges.

Similarities And Differences

To learn more about the differences between the two nail guns, let us break down the two by getting their differences and similarities.

Angled Nail GunStraight Nail Gun
Nail Sizes and CapacityAngled Nailers hold larger nails because their magazines are longer. They have at least 15-gauge nails, perfect for heavy-duty construction.Straight Nailers, on the other hand, have thinner nails. Their magazines cannot accept anything less than 16-gauge.
Can You Carry It Anywhere?Angled Nailers are lighter because they use lesser materials to build them. However, if fully loaded with thick nails, it might weigh more. Although, they are more portable to carry than a Straight Nailer.Interestingly, when it comes to weight, a Straight Nailer is heavier even with thinner nails.
How Much Does It Cost?Angled Nail Guns tend to be expensive because of their thicker nails and overall design.Straight Nail Guns are more affordable because their thin nails are cheaper.

Instances When to Use Your Straight and Angled Finish Nailer

When doing a project, one cannot help but choose between Straight vs. Angled Finish Nailers. To make it easier for you to know when to use one from another, here’s a short list:

When to Use Angled Nailer?

Use Angled Nailers for tight spots and corners.
Angled Nailers are perfect for cramped locations.
It is also ideal for contractual work and restorations.
Angled Nail Guns are helpful when involving thick wood and furniture.

When to Use Straight Nailer?

Straight Finish Nail Guns are ideal for general house repairs and maintenance.
It is also great for thin wood and furniture.
Avoid using Straight Finish Nail Guns on corners. Instead, utilize them in large spaces only.
Straight Finish Nailers are a fantastic choice for beginners and people on a budget.

Other Uses of Angled and Straight Nail Gun

1. Baseboards

nail-gun-using-baseboard
Image: YouTube.com

You can use an Angled or Straight Finish Nailer for baseboards. It all depends on the thickness of the molding. However, when in doubt, use Angled Nail Guns as they work better in almost nooks and corners.

2. Trims

Nailing-on-trim
Image: YouTube.com

You use a Straight or Angled Finish Nailer for trims depending on how delicate the molding is. Fine detailing and thin moldings usually require the help of a Straight Nail Gun.

As for other trims, you can use Angled Finish Nail Gun or a Straight Finish Nailer.

3. Use Straight Nails in an Angled Nailer

Unfortunately, not. Angled Nail Guns tend to use thicker nails, while Straight Finish Nail Guns use thinner types. You cannot interchange the two. 

If you still decide to place straight nails on your Angled Nail Gun, then chances are, it will get obstructed. It will end up with your Angled Nailer requiring repair or unusable. 

What is the Best Angled Finish Nailer?

If you need an Angled Finish Nail Gun for your construction project, let us help you with that. We shortlisted the best nailer in the market to find the best Angled Finish Nailer for you:

1. Metabo HPT Angled Finish Nailer Kit

Metabo HPT Angled Finish Nailer Kit
  • One of the best Angled Nail guns is the Metabo because of its maneuverability and ease of use. It is fantastic when proceeding to drive nails on thick wood or hard-to-reach corners. At the same time, Metabo is lighter than the other competitors in the market.
  • Metabol believes in its quality and that it offers a 5-year warranty to every new purchase from their shop.

2. 3PLUS HDA1564SP Angled Finish Nailer

3PLUS HDA1564SP Angled Finish Nailer
  • Another Angled Nail Gun to look for is the 3Plus. Similar to Metabo, it boasts its maneuverability and ease of use. But it boasts itself as more user-friendly with quick release and single shot.
  • Although an unknown brand, 3Plus has proved to offer the same quality as the big named brands.

What is the Best Straight Finish Nailer?

Looking for the best Straight Finish Nailer in the market is not easy. However, we were able to come up with a pick you will surely love:

1. NuMax SFN64 Pneumatic 16-Gauge Straight Finish Nailer

NuMax SFN64 Pneumatic 16-Gauge Straight Finish Nailer
  • NuMax earned its reputation as the best Straight Finish Nailer because of its durable build and security features. It also has that reliable, ergonomic grip anyone in construction wants.
  • One of its best features is its ability to store 100 nails in a large-sized magazine. At the same time, NuMax can unclog its own jams.

2. Makita AF601 16-Gauge Straight Finish Nailer

Makita AF601 16-Gauge Straight Finish Nailer
  • Coming from a well-known brand, Makita does not disappoint. Its biggest strengths are its power and precision. At the same time, it has a nail-lock mechanism that protects the work surface and tool.
  • Another great thing about Makita is its quick-loading of nails in its rear-loading magazine.

Leave a Comment